WISE-4610-S672 LoRa Outdoor Wireless Sensor Node With 6DI and 2COM
Call for Price
WISE-4610 features a wireless sensor node based on LoRa network technologies targeting outdoor applications. Not only does it provide wireless communication coverage of 5 kilometers, it also has a long battery life due to the low power consumption of the LoRa network.
Please click the link below to open the PDF datasheet
View Datasheet -
- Private LoRa and LoRaWAN selectable
- Longer communication range
- Better penetration through concrete and steel
- Less interference than 2.4GHz spectrum
- Application-ready I/O combination with IP65 enclosure
- Powered by solar rechargeable battery or 10~50VDC input
- GPS/Galileo/BeiDou/GLONASS support
Wireless Communication
-
- Standard: LoRaWAN or Private LoRa
- Private LoRa Frequency Range & Region*:
EU 863-870 (MHz)
US 902-928 (MHz)
JP 915-928 (MHz)
-
- LoRaWAN Frequency Range & Region*:
EU 863-870 (MHz)
US 902-928 (MHz)
* Other region can be supported upon request
-
- Spreading Factor: 7~12
- Outdoor Range: 5km with line of sight (with 2 dBi Antenna)
- Transmit Power: Up to +18dBm
- Receiver Sensitivity: Up to -136dBm at SF = 12 / 125KHz
- Data Rate: 50 kbps at FSK mode EU868
21.9 kbps at SF7 mode US915
5.47 kbps at SF7 mode JP923
-
- Topology: Star
- Function: End Node
GPS1
-
- GNSS Systems: GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS signals
- Max. Update Rate: Single GNSS: up to 18 Hz
Concurrent GNSS: up to 10 Hz
-
- Accuracy: Position: 2.5 m CEP (50% confidence)
With SBAS: 2.0 m CEP (50% confidence)
-
- Acquisition: Cold starts: 57 s
Aided starts: 7 s
General
-
- Power Input: Built-in 4000mA Lithium rechargeable battery pack2
or 10~50VDC external power
-
- Battery Life: 6 months (1 hour data update and 1 day GPS update)
- Configuration Interface: Micro-B USB
- Connector: Power: M12 4-pin code-A male x 1
I/O: M12 8-pin code-D female x 2
-
- LED Indicator: Status, Error, Tx, Rx, Battery/Signal Level
- Mounting: DIN 35 rail, wall, pole, and stack
- Dimension (W x H x D): 82 x 122 x 49 mm (without antenna)
Environment
-
- Operating Temperature2: With battery: 0~60°C
Without battery:: -25~70°C
-
- Operating Humidity: 5~95% RH
1: No GPS version, can be ordered upon request
2: No battery version, can be ordered upon request
WISE-S672 (6DI/2COM ports)
Serial Port
-
- Port Number: 2
- Type: Port 1: RS-485
Port 2: RS-485/232
-
- Serial Signal: RS-485: DATA+, DATARS-232: Tx, Rx, GND
- Data Bits: 7, 8
- Stop Bits: 1, 2
- Parity: None, Odd, Even
- Baud Rate (bps): 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
- Protection: 15 kV ESD
- Protocol: Modbus/RTU (Total 32 address)
Digital Input
-
- Channels: 6
- Input Type: Dry Contact
- Logic Level: 0: Open
1: Close to DCOM
-
- Supports 200Hz Counter Input (32-bit + 1-bit overflow)
- Keep/Discard Counter Value when Power-off
- Supports Inverted DI Status
Related products
