ADAM-6022 Ethernet-based Dual-loop PID Controller

ADAM-6022 Ethernet-based Dual-loop PID Controller (ADAM-6022)

Advantech’s ADAM-6022 is an Ethernet-enabled dual-loop PID controller for general purposed PID control applications. A user-friendly utility software is included for users to set PID parameters (Pv, Mv, & Sv). Through the integrated web page, users can monitor and change the control set point through the Internet via web browser. The ADAM-6022 also supports MODBUS/TCP protocol. HMI software can easily access this module to monitor the I/O data and change the control parameters.

Features
Specs
Resources
3D
Order Info

ADAM-6022 Ethernet-based Dual-loop PID Controller Features

2 loop PID control algorithms built in one package

3 analog input/1 analog output/1 digital input/1digital alarm output for 1 PID loop

Support multiple analog I/O ranges: 0 ~ 10 VDC, 0 ~ 20 mA and 4 ~ 20 mA

Support heating/cooling (direct/reverse) action mode

Support loop open/close (PID disable/enable) and analog output manual control modes

Built-in watchdog timer

ADAM-6022 Ethernet-based Dual-loop PID Controller Specifications

Common Specifications
Models	ADAM-6022/6024
LAN	10/100Base-T(X)
Power Consumption	4 W @ 24 VDC
Connectors	1 x RJ-45 (LAN), Plug-in screw terminal block (I/O and power)
Watchdog	System (1.6 second) and Communication (programmable)
Power Input	10 ~ 30 VDC
Supports	Protocols Modbus/TCP, TCP/IP, UDP and HTTP
Analog Input	Input Impedance 20 M£[
	Accuracy ±0.1% of FSR
	Resolution 16-bit
	Sampling Rate 10 sample/second
	CMR @ 50/60 Hz 90 dB
	NMR @ 50/60 Hz 60 dB
	Span Drift ±25 ppm/° C
	Zero Drift ±6 µV/° C
Analog Output	Accuracy ±0.1% of FSR
	Resolution 12-bit
	Drift ±50 ppm/° C
	Current Load Resistor 0 ~ 500£[
Protection	Isolation Protection 2,000 VDC
	Built-in TVS/ESD Protection
	Over Voltage Protection ±35 VDC
	Power Reversal Protection
Environment	Operating Temperature -10 ~ 50° C
	Storage Temperature -20 ~ 80° C
	Humidity (Operating) 20 ~ 95% RH (non-condensing)
	(Storage) 0 ~ 95% RH (non-condensing)
General
Loop Number	2 (3 AI, 1 AO, 1 DI, 1 DO for each control loop)
Analog Input
Channels	6 (differential)
Input Range	±10 VDC, 0 ~ 20 mA, 4 ~ 20 mA
Analog Output
Channels	2
Output Type	V, mA
Output Range	0 ~10 VDC, 4 ~ 20 mA, 0 ~ 20 mA
Digital Input
Channels	2
Dry contact	Logic level 0: close to GND
	Logic level 1: open
Wet Contact	Logic level 0: 0 ~ 3 VDC
	Logic level 1: 10 ~ 30 VDC
Digital Output
Channels	2
Features	Open Collector to 30 V, 100 mA maximum load
Power Dissipation	300 mW for each module

External links for ADAM-6022

	Datasheet - Brief details and specifications on ADAM-6022 Ethernet-based Dual-loop PID Controller
	Advantech Support Portal - Manuals and drivers for ADAM-6022
	Windows Embedded Home Page - Operating system details, datasheets and updates

Semaphore Systems are unable to guarantee availability of external links

3D Model for ADAM-6022 Ethernet-based Dual-loop PID Controller

	View 3D Model - Click to view ADAM-6022 Ethernet-based Dual-loop PID Controller in 3D using SolidWorks eDrawing online viewer
	Download 3D Model - Right-click the link and choose "Save Target As..." to download eDrawing file for ADAM-6022 Ethernet-based Dual-loop PID Controller
	CAD Downloads - Click to view available CAD downloads (including eViewer) from SolidWorks

Ordering information for ADAM-6022 Ethernet-based Dual-loop PID Controller

Product code	Product options
ADAM-6022	Ethernet-based Dual-loop PID Controller